Coaster 2253K - Parts Identification; Hardware Identification; Assembly Tips

ITEM:2253K
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
A
RIGHT
HEADBOARD
1PC F BED SUPPORT 2PC
B
LEFT
HEADBOARD
1PC G SAFETY RAIL 2PC
C TOP BEDBASE 1PC H RIGHT JOINT 1PC
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
PARTS IDENTIFICATION
45 MINUTES
D
LOWER FRONT
BEDBASE
1PC I LEFT JOINT 1PC
E
LOWER BACK
BEDBASE
1PC J HOOK 1PC
1
BOLT
(1/4X10mm)
8PCS 7
NUT
5/16
12PCS
2
BOLT
(5/16X32mm)
4PCS 8 PVC STICKER 4PCS
3
BOLT
(5/16X45mm)
8PCS 9
ALLEN KEY
4mm
1PC
4
BOLT
(5/16X53mm)
8PCS 10
ALLEN KEY
5mm
1PC
5
WASHER
8.5mm
20PCS 11
WRENCH
13mm
1PC
6
SPRING
WASHER
8.5mm
12PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
PAGE 2 OF 6
HARDWARE IDENTIFICATION