Coats 7060 User Manual

®
7050/7060/
7065 AX/EX
Rim Clamp
®
Tire Changer
For servicing single piece
automotive and most light
truck tire/wheel assemblies
1601 J. P. Hennessy Drive, LaVergne, TN USA 37086-3565 615/641-7533 800/688-6359 Manual Part No.: 8183760 05
HENNESSY INDUSTRIES INC. Manufacturer of AMMCO
®
, COATS
®
and BADA
®
Automotive Service Equipment and Tools. Revision: 10/08
Safety Instructions
Operating Instructions
Maintenance Instructions
Installation Instructions
READ these instructions before placing unit in
service. KEEP these and other materials delivered
with the unit in a binder near the machine for
ease of reference by supervisors and operators.
* 7050 & 7065 Models Shown
See
RIM Safety page iv
¨Operating
Instructions
page 4

Coats 7060 Specifications

General

Max Wheel Diameter	47" (1200 mm)
Inside Rim Diameter	10-24 inches
Outside Rim Diameter	10-24 inches
Max. Tire Diameter	47" (1200 mm)
Air Pressure	8-10 bar

Summary

Safety Instructions

Owner's Responsibility

Owner's duties for machine and user safety.

Operator Protective Equipment

Guidance on PPE for safer tire servicing.

Safety Notices and Decals

Remember R.I.M.

Operating Instructions

Bead Loosening and Demounting

Steps for loosening and removing tire beads from the rim.

Mounting

Procedures for installing a new tire onto the wheel rim.

Inflation

Mismatched Tires and Wheels

Dangers and procedures for handling tire/wheel mismatches.

ONE WORD FOR SAFETY R.I.M.

BE CAREFUL OF THESE SITUATIONS