READ these instructions before placing unit in
service. KEEP these and other materials delivered
with the unit in a binder near the machine for ease
of reference by supervisors and operators.
Safety Instructions
Set-up Instructions
Operation Instructions
Maintenance Instructions
See
RIM Safety page 1
Operating
Instructions
on page 4.
1601 J. P. Hennessy Drive, LaVergne, TN USA 37086 615/641-7533 800/688/6359 www.coatsgarage.com Manual Part No.: 85611918 00
HENNESSY INDUSTRIES LLC Manufacturer of COATS
®
, AMMCO
®
and BADA
®
Automotive Service Equipment and Tools. Revision: 8/20
80C Model
Center Clamp Tire Changer
For servicing single piece
automotive and most tubeless light
truck tire/wheel assemblies.
Any other type, including tube type agricultrual,
require special handling. Tires identied as truck
tires need to adhere to OSHA standard 1910.177.
Shown with optional
EL-X Express Lane
®
Ination System
(part # 85607770)
To Next Page
Need help?
General
