Coats 80C User Manual

READ these instructions before placing unit in
service. KEEP these and other materials delivered
with the unit in a binder near the machine for ease
of reference by supervisors and operators.
Safety Instructions
Set-up Instructions
Operation Instructions
Maintenance Instructions
See
RIM Safety page 1
Operating
Instructions
on page 4.
1601 J. P. Hennessy Drive, LaVergne, TN USA 37086 615/641-7533 800/688/6359 www.coatsgarage.com Manual Part No.: 85611918 00
HENNESSY INDUSTRIES LLC Manufacturer of COATS
®
, AMMCO
®
and BADA
®
Automotive Service Equipment and Tools. Revision: 8/20
80C Model
Center Clamp Tire Changer
For servicing single piece
automotive and most tubeless light
truck tire/wheel assemblies.
Any other type, including tube type agricultrual,
require special handling. Tires identied as truck
tires need to adhere to OSHA standard 1910.177.
Shown with optional
EL-X Express Lane
®
Ination System
(part # 85607770)

Coats 80C Specifications

General

Brand	Coats
Model	80C
Category	Tyre Changers
Language	English

Summary

Safety Instructions

Understanding Hazard Levels

Principal Operating Parts

Operating Instructions

Tire Bead Loosening and Demounting

Procedures for safely loosening and removing tire beads from the rim.

Tire Mounting

Step-by-step guide for safely mounting tires onto wheels.

Inflation Process: Seal, Seat, and Inflate

Explains bead sealing, bead seating, and final tire inflation steps.

Mismatched Tires and Wheels Hazards

Critical warnings about explosion risks from mismatched tire and wheel combinations.

Maintenance Instructions

Essential Maintenance Safety Protocols

Critical safety steps before maintenance: power disconnection and PPE.

Pressure Limiter Maintenance

Setup Instructions