To Next PageTo Next PageWhat to do if my COBHAM Handhelds Meazura will not power on?
If your COBHAM Handhelds Meazura won't power on, the most likely cause is a dead battery. To resolve this, charge the battery for at least 2 hours.
How to fix COBHAM Handhelds Meazura when programs will not respond?
If your COBHAM Handhelds Meazura is “locked” up and programs are unresponsive, perform a soft reset. Hold down both the power and backlight keys simultaneously. This will stop what the Meazura is doing and restart it, while retaining all applications and data stored on the handheld.
What to do if COBHAM Handhelds Meazura will not respond to soft reset?
If your COBHAM Handhelds Meazura won't respond to a soft reset, perform a hard reset. Do this by performing a soft reset, but keep the power key held down until the Palm Powered? logo appears. A confirmation message will ask you to confirm the hard reset. Pressing the UP arrow key will proceed with the process. Keep in mind that a hard reset erases all programs, data, patches, and user information.
Details the functions of the Handheld Programmer and its use as a substitute for older Artex test sets.
Highlights key distinctions between the Handheld Programmer and previous Artex test sets like the Sartech.
Lists the capabilities and features of the 453-2000 Handheld Programmer, including ruggedness and waterproof rating.
Explains the core hardware (Meazura MEZ1000) and software architecture of the Handheld Programmer.
Provides a general overview of the Handheld Programmer's hardware components and their functions.
Details the connectors on the Handheld Programmer and the types of cables used for ELT connectivity.
Describes the buttons and controls on the Meazura MEZ1000 unit used to operate the programmer.
Covers the rechargeable Lithium Ion battery pack, including its specifications, warnings, and storage.
Instructions on how to perform the initial setup and configuration of the Handheld Programmer unit.
Explains the process of synchronizing the Handheld Programmer with a PC using the Hot Sync function.
Describes the functionality and operation of the Artex software used for programming Artex ELTs.
Step-by-step instructions on how to launch the Artex programming application from the home screen.
Details how to configure various settings and preferences within the Artex programming software.
Information about the internal database that stores programmed ELT records, including capacity and management.
Provides essential instructions and precautions for programming various Artex ELT models.
Details the different programming protocols available for ELTs and how to select them.
Explains how to use the software to read battery usage and activation data.
Describes the hardware operation of the Programming Adapter (PA) with and without its cannon plug attached.
Details the software operation for programming the C406-N series PA, similar to ELT programming.
Lists important precautions and safety guidelines to be followed during ELT testing procedures.
Explains how to use the Sarcalc software to read and decode ELT messages.
Information on how recorded ELT messages are saved and accessed in the Sarcalc database.
Instructions on how to print received ELT messages using compatible printers.
Lists compatible printers for label printing and notes on their support.
Instructions on how to print various types of labels (ID, Country, Combined) for ELTs.
Details the process for printing reports using third-party software and compatible printers.
Outlines the requirements for labeling ELTs and PAs after reprogramming, including label types.
Explains the importance of registering ELTs with aviation authorities and the process involved.
Lists the technical specifications for the base Meazura MEZ1000 unit.
Details the technical specifications specific to the Handheld Programmer module.
Information regarding the factory calibration status of the Handheld Programmer.
Lists the part numbers for components included in the Artex Handheld Programmer kit.
Details optional equipment that may be required or useful for operating the Handheld Programmer.
Provides a guide to common symptoms, likely causes, and actions for troubleshooting the Handheld Programmer.
Information on how to obtain technical assistance for programming ELTs and using the manual.
Details the warranty coverage for the Handheld Programmer and where to find more information.
An alphabetical index of terms and topics covered in the manual for quick reference.
General