570-2000, Rev. E, 453-2000 Handheld Programmer Operations Manual
10. Specifications and Calibration
The following subsections provide specifications and calibration information.
10.1 Meazura MEZ1000 Specifications
Operating System: Palm OS 4.1.2
Memory: 16MB SDRAM, 4MB Flash
Display: 160x160 pixel grayscale, backlit
Communications: USB (cable provided)
Serial (1.2-115Kbs)
IrDA Infrared (1.2-115.2Kbs)
Battery 3.6V Li-Ion 1900mAh
Sealing IP67 – submersible to 1 meter (30 min)
Current Consumption: 21 mA (backlight off) unit ON (excluding module)
2 mA Sleep mode
Contact Aceeca at www.aceeca.com
for more information on the base Aceeca Meazura
unit or for additional accessories.
10.2 Handheld Programmer Module Specifications:
406 receiver range: -60 dBm to +36 dBm (5W)
Power source: Meazura internal battery
Decoding: Per COSPAS/SARSAT C/S T.001, Issue 3 Rev. 5
Current Consumption: 10 mA unit ON
<100 nA Sleep mode
10.3 Calibration
The Handheld Programmer is factory calibrated and does not require periodic re-
calibration.
Page 35
To Next Page
Loading...