COBHAM 453-2000 - Components and Optional Equipment; System Component Part Numbers; Optional Equipment

570-2000, Rev. E, 453-2000 Handheld Programmer Operations Manual
11. Components and Optional Equipment
The following subsections provide information on system component part numbers and
optional equipment.
11.1 System Component Part Numbers
The Artex Handheld Programmer is being offered as a complete kit (455-9181) with the
following parts:
1 ea. 453-2000 Handheld Programmer Main Assembly
1 ea. 110-418 Antenna, ¼ Wave Flexible Whip 418 MHz
1 ea. 452-0100 Holster, Padded Handheld Programmer
1 ea. 452-0101 Stylus, Handheld Programmer
1 ea. 452-0102 Battery, Handheld Programmer
1 ea. 452-0103 USB Cable, Handheld Programmer
1 ea. 452-0104 Charger, Handheld Programmer
1 ea. 510-1200 Desktop Software for ELT Test Set (CD-ROM)
1 ea. 570-2000 Manual, Handheld Programmer Operation
1 ea 611-0110 110/C406 Series Programming Cable
1 ea 611-0111 C406-N/PA Series Programming Cable
1 ea 611-0112 ME406 Series Programming Cable
Any of the above part numbers may be ordered as a replacement or as a separate line
item. Contact the Artex Sales department at 1-800-547-8901 for details.
11.2 Optional Equipment
If national or local regulations require that the ELT be attenuated and/or directly
connected to the Handheld Programmer, the following parts may be used:
500-3000 Attenuator, 30 dB
500-3200 Attenuator, 20 dB
611-9010 Cable, Coax 6 ft.TPS to BNC (For Dual Output ELT)
611-6013 Cable, Coax BNC to BNC (For Single Ouput ELT)
Commercial equivalents of any of these parts may also be used.
Page 36