COBHAM NanoVue User Manual

NanoVue Receiver
Version 1
Part A - User Guide
Operating your NanoVue
NANOVUE-user-guide-R06-
2011-07-07.doc
61
DS000042 Commercial in Confidence
Enter a subnet mask in
the Network mask text box.
Gateway Example:
192.168.2.120
A default gateway is used
by a host when an IP
packet's destination address
belongs to someplace
outside the local subnet.
The default gateway
address is usually an
interface belonging to the
LAN’s border router.
We recommend you leave
the gateway at the same
setting as the IP Address.
12-24-03 OSD Settings
Unit Parameter
Options
Notes
OSD Brightness
Day or Night
Day setting gives a brighter
screen than Night setting.
Blue Screen on Fail
Checked or
unchecked
Select Checked (on) or
unchecked (off) from this
checkbox to decide what
happens when the video
signal can no longer be
decoded.
ON – The screen will display
a blue screen
OFF – The screen will show
a freeze frame of the last
image it was able to
decode.
12-24-04 Streaming Settings
Unit Parameter Options Notes
Streaming Status Off or On Switches the streaming on
or off.
Multicast Address 224.2.128.12 This text box enables you to
change the multicast
address used by the unit.

COBHAM NanoVue Specifications

General

Brand	COBHAM
Model	NanoVue
Category	Receiver
Language	English