COBHAM SAILOR SP3500 Series User Manual

Operation
13
Alive beep
To enable “ALIVE” function do as follows:
1. Select the channel where ALIVE function is desired to be transmitted.
2. Press and hold the Hi/Lo until you see “ALIVE ON” on the radio
display. It takes approx. a second.
3. Now “ALIVE” is transmitted by a "beep" on the working channel, with
approx. 4-second intervals.
To deactivate “ALIVE” function do as follows:
• Press and hold the Hi/Lo pressed until “ALIVE ON” no longer appears
on the radio display. It takes approx. a second.
“ALIVE” function is also deactivated when
• The channel is changed.
• The radio is turned OFF and ON again.
• Watch or scanning is enabled.
• Squelch is open.
Refer to ALIVE on page 24
1211

COBHAM SAILOR SP3500 Series Specifications

General

Brand	COBHAM
Model	SAILOR SP3500 Series
Category	Portable Radio
Language	English