EasyManua.ls Logo

COBIA 217 CC - Ladder and Propeller; Stainless Boarding Ladder; Propeller Selection and Inspection

Default Icon
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
May 30, 2012
Maverick Boat Company, Inc. • 3207 Industrial 29th St. • Fort Pierce,
Florida 34946 • (772)-465-0631 or (888)-shallow • Fax: (772) 489-2168
LADDER AND PROPS
Props
Prop selection on your Cobia is determined by your local
Cobia Dealer, but all props are based on
recommendations from Cobia Boat Company and
Yamaha Marine in order to give your boat maximum
overall performance. The needs of your prop will
determine the prop design and size that best fits your
performance requirements.
Always inspect the engine and prop prior to launching
your boat with the engine off. Key prop issues include
tangled fishing line or other types of debris, cracked
blades or fluid leaking out of the seal. Look for fishing line
tangled around the prop or lower unit seal. Consult your
Yamaha’s Owner’s Manual to address these issues.
No passenger should attempt to enter or exit the boat by the ladder or by any other means
while the engine is on.
Stainless Boarding Ladder
The 217 model comes standard with a telescoping stainless
steel boarding ladder integrated into the port aft platform area.
This provides a stepping area while the ladder is in the up
position as shown below.

Related product manuals