Dim Button
Press and release
Settings
Your Detector
Nothing Comes Close to a Cobra
®
7
UltraBright Data Display Brightness
You can choose from three settings for Brightness of the display.
You can cycle through the settings by repeatedly pushing the Dim button.
The factory setting is Bright.
Press and
release Dim
button
To Change the Brightness to Dim
Press and release
the Dim button
once.
Tone Voice
Visual Display
One beep Dim Display dims
To Change the Brightness to Dark
Press and release
the Dim button
again.
Tone Voice
Visual Display
One beep Dark Display remains
dim (no visual
alerts will be seen)
To Change the Brightness to Bright
Press and release
the Dim button a
third time.
Tone Voice
Visual Display
Two beeps Bright Display returns
to full brightness
Bright
Dark
Dim
To Next Page
Loading...
