9
Dual Watch
This features allows the user to scan between two
selected channels.
1. Select first channel, CB mode.
2. Press and hold DW until LED begins flashing and
beeps once.
3. Select second channel. Press DW until LED lights
steady and radio beeps twice. Two channels are
now stored in DW memory.
Scan
Press and release SCAN button to activate CB scan
mode. If the radio is squelched, radio begins to scan.
When scan is interrupted by a signal, scan stops and
holds until loss of signal. Press PTT on mic to stop
scan function. Press Scan to restart CB scan.
Operation
Dual Watch
Note
The radio needs to be
squelched before DW can
monitor both channels.
To Next Page
Loading...
Need help?
General
