Cobra 25 NW ST - Setting Channel Selector

The CB/PA button should be in the
CB position.
Operation
9
Operation
Turning On Setting Channel
Selector
8
Turning On
Make sure the power cord,antenna and micro-
phone are connected to their proper connectors
before starting.
Setting Channel Selector
2
1
Ro t ate the On/Off Volume knob c l oc kw i s eto
a normal listening level.
Select one of forty channels and adjust
volume.The selected channel is indicated by
the LED readout directly above the channel
selector knob
1
25 NWST Manual3.3 6/15/99 12:43 PM Page 8