To achieve the Desired Squelch Setting (DSS),
turn the Squelch control counterclockwise
until you hear noise. Now turn the control
clockwise just until the noise stops. This is the
DSS setting.
1716
Operation Operation
3
Gate set to Desired
Squelch Setting (DSS)
ToTransmit
To Transmit
Caution!
Be sure the antenna is properly
connected to the radio before
transmitting.Prolonged trans-
mitting without an antenna,or
a poorly matched antenna,
could cause damage to the
transmitter.
Be sure to read the F.C.C.Rules
and Regulations included with
this unit before transmitting.
Select desired channel.
1
25 NWST Manual3.3 6/15/99 12:43 PM Page 16
To Next Page
Loading...
