To Next PageTo Next Page
Need help?Do you have a question about the Cobra 29 LTD Classic and is the answer not in the manual?
General| Type | CB Radio |
|---|---|
| Channels | 40 |
| Modulation | AM |
| Power Output | 4 Watts |
| Weight | 4.5 lbs |
| RF Gain | Yes |
| Instant Channel 9 | Yes |
| SWR Calibration | Yes |
| PA Capability | Yes |
| Antenna Impedance | 50 Ohms |
| Power Supply | 13.8V DC |
| Frequency Range | 26.965 MHz to 27.405 MHz |
Plan transceiver and microphone bracket location for convenient operation.
Secure transceiver bracket using screws and washers for a strong, convenient mount.
Connect the power cord to the battery or fuse, observing polarity markings.
Mount the microphone bracket on either side of the radio for easy access.
Proper antenna matching is critical for maximum power output and transmission distance.
Boats require a ground plate for maximum transceiver efficiency; consult dealer for grounding systems.
Electrical noise from alternator/ignition can limit receiver performance; check vehicle for sources.
Basic steps to power on the CB radio and select a desired channel.
Set CH9/CH19/NOR switch to NOR and select desired channel.
Guide to calibrating the SWR meter for accurate antenna system measurement.
After calibration, switch to SWR to read SWR; repeat for channels 1 and 40.
Rotate volume knob clockwise to enable reception; green RX/TX LED illuminates.
Switch to NORMAL and select desired channel using the selector knob.
Indicates incoming signal strength when receiving; ensure S/RF-SWR-CAL switch is in S/RF.
ANL reduces vehicle noise; NB/ANL adds RF Noise Blanker for more filtration.
Adjust brightness of channel indicator and meter for day/night driving.
Optimize reception by adjusting RF Gain for strong/weak signal areas.
Fine-tunes signals and reduces adjacent channel interference.
Gates incoming signals; clockwise reduces noise, counterclockwise opens the gate.
Ensure antenna is connected. Push mic button, speak clearly. Release to receive.
Controls microphone sensitivity (outgoing audio level); set fully clockwise initially.
Indicates RF output (outgoing signal) during transmission; ensure S/RF position.
Connect external speaker to rear jack for monitoring; internal speaker disconnects.
Connect PA speaker, set CB/PA to PA, adjust volume with Dynamike.
Operate from home using a 13.8V DC power supply and base station antenna.
Use optional power adapter and magnetic antenna for quick temporary mobile installation.
Rules on conversation length, illegal amplification, profanity, music, and selling.
Guidelines for using channel 9 for emergencies, including distress data (CLIP).
Common CB 10-Codes for quick and easy communication in noisy areas.
Detailed specifications including channels, frequency range, power, receiver, and transmitter specs.
FCC compliance statements regarding interference and operation.
Industry Canada compliance for license-exempt RSS standards and interference.
Outlines the two-year warranty, exclusions, and claim requirements.
Contact info for Cobra support, service, and warranty inquiries in US/Canada.
Information on purchasing Cobra products, website, order processing, and shipping.
Background on Citizens Band radio service, its history, and FCC transmission regulations.
Lists package contents: transceiver, microphone, brackets, power cord, manual.
Detailed breakdown of front panel controls and indicators with numerical references.
Contact info for Cobra Customer Service for operational or feature assistance.
Identifies rear panel connectors: antenna, PA/External Speaker, and power jack.
Offers assistance for product issues or features, listing contact hours and phone numbers.
