Page 10 For technical questions, please call 1-888-866-5797. Item 57647
Inspection, Maintenance, and Cleaning
Procedures not specifically explained in this manual must be performed
only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ELECTRIC SHOCK:
Unplug the Camera from the NVR before inspection, maintenance, or cleaning.
1. PERIODICALLY, inspect the general
condition of the Camera. Check for:
• loose hardware,
• damaged cord/electrical wiring,
• cracked or broken parts, and
• any other condition that may
affect its safe operation.
2. PERIODICALLY, wipe external
surfaces of Camera with clean cloth.
3. Maintain area surrounding
Camera, making sure obstacles
don’t interfere with visibility,
such as overgrown bushes.
Troubleshooting
Problem Possible Causes Probable Solutions
Camera does
not work.
1. No power from NVR.
2. RJ45 cable not
properly connected.
1. Check the NVR is powered on.
2. Check that the RJ45 cable
is securely connected.
Poor image quality. Camera lens is dirty. Clean Camera lens.
View undesirable. Camera out of adjustment. Loosen adjustment screws and
adjust Camera as needed.
Image is upside
down/sideways.
Camera not mounted
correctly.
Loosen adjustment screws and
adjust Camera as needed.
To Next Page
Loading...
Need help?
General
