Page 10 For technical questions, please call 1-888-866-5797. Item 58197
Inspection, Maintenance, and Cleaning
Procedures not specifically explained in this manual must be performed
only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ELECTRIC SHOCK:
Unplug the Power Adapter from its electrical outlet
before inspection, maintenance, or cleaning.
1. PERIODICALLY, inspect the general
condition of the Camera. Check for:
• loose hardware,
• damaged cord/electrical wiring,
• cracked or broken parts, and
• any other condition that may
affect its safe operation.
2. PERIODICALLY, wipe external
surfaces of Camera with clean cloth.
3. Maintain area surrounding
Camera, making sure obstacles
don’t interfere with visibility,
such as overgrown bushes.
Troubleshooting
Problem Possible Causes Probable Solutions
Camera does
not work.
1. No power at outlet.
2. Cables not properly
connected.
1. Check power at outlet.
2. Check that all cables are
securely connected.
Poor image quality. Camera lens is dirty. Clean Camera lens.
View undesirable. Camera out of
adjustment.
Loosen Vertical/Horizontal Screws,
tilt/pan Camera as needed,
then tighten Screws.
Image is upside
down/sideways.
Camera not mounted
correctly.
Loosen Position Screws,
rotate Camera as needed,
then tighten Screws.
To Next Page
Loading...
Need help?
General
