12 | P a g e
BUTTON OPTIONS (While Recording):
For the CDR835, CDR855BT, and CDR875G the button simply turns the screen off or on.
Turning the screen off does not interrupt video recording. The red LED on the top left of
the unit will flash to indicate that the unit is recording.
For the CDR895, Button 1 cycles through CAM 1 view, CAM 2 view, Screen Off, and Split
Screen View.
Toggles the microphone on/off. Note that the icon on the button indicates the action
that will be taken when the button is pushed, not the current setting. The current
setting is shown on the status bar at the top of the screen.
Takes a snapshot and stores it as a .JPEG file.
Pauses the video. While in an emergency recording you will have to press pause once to
cancel the emergency recording and then a second time to pause the video.
BUTTON OPTIONS (While Paused):
Enters the settings menu to change the video settings, general settings, iRadar app
settings (CDR855BT and CDR875G only), and language settings.
Enters the playback menu to review previous recordings and photos.
Takes a snapshot and stores it as a .JPEG file.
Starts a recording.
To Next Page
Loading...
Need help?
General
