EasyManua.ls Logo

Cobra G100 - Horn and Siren Connection; Original Horn Connection; Additional Siren Connection

Cobra G100
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
COMPLETE INSTRUCTIONS
G100
42
6.3 - Disarming.
When radiocontrol button “B” is pressed, the doors unlock.
The direction lights flash once.
The buzzer emits one acoustic signal (if enabled).
The protection functions are immediately deactivated.
The LED is switched off.
6.4 - Interrupting an alarm during the warning-signal cycle.
While the system is sounding the alarm it is possible to deactive the siren
and flashing lights by pressing radio control button “B” once (one press).
This operation interrupts the alarm cycle, but the system stays armed. To
deactivate the system completely, it is necessary to disarm it by pressing
radiocontrol button “B” again (two presses).
RADIOCONTROL FUNCTIONS
Button
A
Button
B
Arming
Disarming
Interrupt alarm
Panic alarm
Deactivate ultrasonic volumetric
sensor and additional sensor
(if installed)
Car finder
B
A
B
A

Other manuals for Cobra G100

Related product manuals