COMPLETE INSTRUCTIONS
G100
36
2 - INFORMATION.
The system is equipped with a self-learning function which makes it possible to simplify
all operations necessary for adding or replacing radio controls but only with the user’s
consent. For the procedure make reference to the manual at page 58.
2.1 - Personal Pin Code.
Each G100 system has a Pin Code that is used to disarm the system in emergencies.
This is a PIN CODE CARD sample
(PIN CODE is a factory - setted):
We advise you to stick the PIN CODE adhesive label onto the PIN
CODE card (which may be found on the rear of the control unit).
ATTENTION!
Don’t leave the PIN CODE CARD inside the vehicle.
www.cobra-at.com
STICK ON PIN
CODE LABEL
PERSONAL PIN CODE
4C4415A2A
S/N 0003 050524
PIN
CODE
1122
To Next Page
Loading...
Need help?
General
