Cobra Micro Talk 3 - Recalling and Using Stored Memory Channels

Advanced Features
27
Advanced Features
26
Using
Memory
Locations
Select desired memory location you wish to
recall (0-9) by pushing and releasing
buttons.
2
Push and hold button and talk.Your radio
will stay on this recalled location until you
exit out of memory function mode.
Repeat step 2 for recalling other memor y
locations.
3
4
Push and release button.
To exit the Memory Mode and return to
Operational Mode:
5
Push and release button until MEM icon
and a memory location flashes.
Memory Channel Recall/Talk
To recall a channel in memory:
1
Note
If function button is pushed
while listening/talking,
programming will begin.
See Programming Memory
Locations on page.22.
Function
Channel
Enter
PTT
...
FRS300.MANUAL.qx 10/2/98 12:39 PM Page 32