EasyManua.ls Logo

Cobra Micro Talk 3 - Transmitting Your Voice Message

Cobra Micro Talk 3
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
13
Note
While PTT button is
depressed you cannot
receive incoming calls.
Note
When you release the
PTT button,the person you
are talking to will hear a tone
indicating that it’s ok to talk.
See Talk Confirmation Tone
section on page 14.
Operation
12
Talking To Another Party
To send your outgoing message:
Turn on your MicroTalk 3 2-way radio.
An audible tone”will indicate the unit is on.
The LCD will go through a 3 second self test
and then go to operational mode.
Talking to
Another
Party
3
4
5 6
1
Place antenna in full
upright position.
2
Note
Both units must be on same
channel to communicate.
PTT
...
PTT
...
The i con will appe a r.
Push and hold button.
Hold mic about
2 inches from
mouth. Speak in
a normal voice.
Release button
and listen for
response.
FRS300.MANUAL.qx 10/2/98 12:39 PM Page 18

Related product manuals