9
Operation
Standby Mode
When finished talking, release PTT Talk Button
to receive incoming transmissions.
Your microTALK PR 900 DX is always in the
Standby Mode when the PTT Talk Button is
not pressed and you are not in Mode Function.
See Advanced Features section on page 14.
Standby Mode
8
Note
While PTT Talk Button is
depressed you cannot
receive incoming calls.
Operation
Press and hold PTT Talk Button.
Th e transmit LED will light up in re d.
Release PTT Talk Button and listen
for response.
Hold mic about 2 inches from mouth.
Speak in a normal voice.
Talking to
Another
Party
PRESS AND
HOLD
RELEASE FOR
RESPONSE
To Next Page
Loading...
