Cobra PR561 BLT User Manual

VibrAlert
®
and Call Alert
•
Your MicroTALK
®
radio can alert you to incoming
signals by sounding an audible call tone or an
audible tone with VibrAlert
®
.
To change call settings:
1. Press the Mode button until the Call Setting
icon flashes on the display. The current setting
(“01” vibrate + ring, “02” ring only) is displayed.
2. Press the Channel Up or Channel Down button to
change the call setting.
3. Choose one of the following:
a. Press the Mode button to enter the new
setting and proceed to other functions.
b. Press Talk or Call/Lock button to return to
Standby mode.
c. Do not press any buttons for 12 seconds to return
to Standby mode.
12
Ten Call Tone Settings
•
You can choose between ten different Call Tone Settings to transmit
a call alert.
To change a call tone setting:
1. Press the Mode/Power button until the
letter “C” and the current call tone number
(01 through 10) is displayed. The current
call tone will sound for three seconds.
2. Press the Channel Up or Channel Down button
to hear the other call tone settings.
3. Choose one of the following:
a. Press the Mode/Power button to enter the
new setting and proceed to other functions.
b. Press Talk or Call/Lock button to return to
Standby mode.
c. Do not press any buttons for 12 seconds to return
to Standby mode.
Call Tone Setting
M
E
M
E
S
C
M
a
x
R
a
n
g
e
H
I
/
L
O
W
S
c
a
n
PR561
Mode/Power
M
E
M
E
S
C
M
a
x
R
a
n
g
e
H
I
/
L
O
W
S
c
a
n
PR561
Channel Button
Call Tone On/
Vibrate On
Call Tone On/
Vibrate Off

Cobra PR561 BLT Specifications

General

Brand	Cobra
Model	PR561 BLT
Category	Two-Way Radio
Language	English