► Wait until the front cover, exhaust pipe, and bottom
of the machine has cooled down before carrying
out maintenance work.
CAUTION Hot insertion tool
The tip of the insertion tool can become hot and
sharp when used. Touching it can lead to burns and
cuts.
► Never touch a hot or sharp insertion tool.
► Wait until the insertion tool has cooled down before
carrying out maintenance work.
Storage, precautions
♦
Keep the machine and tools in a safe place, out
of the reach of children and locked up.
11© 2010 Atlas Copco Construction Tools AB | No. 9800 0995 93 | 2010-01-12
Original instructions
Safety and operating instructionsCOBRA PRO, TT, TT-AWD
To Next Page
Loading...
Need help?
General