1. Check that the switch is in the ON position (A).
2. Check that there is fuel in the tank.
3. Check that the spark plug is undamaged and that
the electrode gap is 0.6–0.7 mm (0.024-0.0275
in.).
4. Check that the air filter is clean and not clogged.
5. Check that the inserted tool in use has the correct
shank dimensions.
If the machine still does not function satisfactorily,
contact an authorised workshop.
Storage
♦
Empty the tank before storing the machine.
♦
Check that the machine is properly cleaned before
putting it away for storage.
♦
Store the machine in a dry place.
♦
We recommend to store the machine in a standing
position. If stored in a lying position, the machine
must be placed on the back cover.
♦
Keep the machine and tools in a safe place, out
of the reach of children and locked up.
Disposal
A used machine must be treated and deposed of in
such a way that the greatest possible portion of the
material can be recycled and any negative influence
on the environment is kept as low as possible, and
in respect to local restrictions.
Before a petrol driven machine is deposited it must
be emptied and cleaned of all oil and petrol.
Remaining oil and petrol must be dealt with in a way
that does not affect the environment.
21© 2010 Atlas Copco Construction Tools AB | No. 9800 0995 93 | 2010-01-12
Original instructions
Safety and operating instructionsCOBRA PRO, TT, TT-AWD
To Next Page
Loading...
Need help?
General