3-3 Air Cleaner
BREATHE TUBE
GASKET
CASE
NUT M6
PAPER FILTER ELEMENT
FOAM FILTER ELEMENT
COVER
Wash the engine each 50 hrs (or 3 months). (Wash more frequently in dust area)
Remove the air cleaner cover and take the element out.
Change the damaged element.
Clean the element before reusing.
Clean the element：
Wash the element with detergent and dry it.
Immerse the element into the oil and squeeze the excessive oil. The element should
be wet, but not drop the oil.
Blow the compressed air from the inner side or lightly tap to move the dust. If dirty
badly, replace in time.
Be careful to prevent dirt from entering the air duct that leads to the carburetor.
Place the foam element over the paper element, and cover the case cover on.
To Next Page
Loading...