Cobra Y173V - Carburetor

36
4. DISASSEMBLING AND SERVICING
Wash the carburetor in the clean place, first, clean the outside surface, and wash the inside
the parts with special carburetor detergent or industrial gasoline. Exception for washing
impurities, also wash the gasoline colloid on the part surface. Blow the washed parts clean
with compression air, and don’t use cloth and paper against recontaminating. Don’t use the
steel wire and other hard material to open the blocked hole to prevent carburetor performance
from changing holes diameter. Use the gasoline and compression air to clean it.
THROTTLE VALVE
THROTTLE SHAFT
CHOKE SHAFT
INSULATOR
GASKET
(Don’t Reuse)
CHOKE
CARBURETOR
INSULATOR
AIR CLEANER
CARBURETOR
Gasket (Don’T
Reuse)
CARBURETOR GASKET
(Don’T Reuse)