4. DISASSEMBLING AND SERVICING
Remove the fuel tube, screw the fuel strainer bolt off and remove the fuel tank.
Clean the fuel tank and dry it thoroughly.
After Cleaning, install the strainer on the fuel tank and connect the fuel tube.
Check the fuel tank for leak.
Install the engine housing, fuel tank cover, recoil starter grip and nut(M6)
ｃ）Notice
Check fuel tank cover vent foe blocked；
Check the fuel strainer for clogged or broken；
Check the fuel hose for aging or cracks；
If finding trouble, replace it in time before installation.
4-4-4 Air Cleaner
Removal /Installation
BREATHE TUBE
GASKET
CASE
NUT M6
PAPER FILTER ELEMENT
FOAM FILTER ELEMENT
COVER
To Next Page