Coca-Cola FREESTYLE 8100 - Understanding Crew Dashboard; Crew Dashboard Overview

           
COCA-COLA FREESTYLE
®
8100 COCA-COLA FREESTYLE
®
8100
23
22
2
Scrub both nozzles with blunt end
of nozzle brush and soap.
Rinse with warm water.
Allow to air dry.
Cleaning nozzles Clean ring area in nozzle tray
1
Using a clean cloth, twist both
nozzles counter clockwise
and pull down to remove.
3
Submerge all parts
in sanitizer for 2 minutes.
Agitate to remove air pockets.
1
Scrub both ring areas
including holes with
pointed end of nozzle
brush dipped in sanitizer.
2
Wipe rings with clean cloth and
sanitizer until it comes away clean.
Wait 2 minutes.
Repeat scrubbing and wiping rings
with clean sanitizer.
3
Insert cleaned

water nozzle.
4
Re-insert nozzles
by pushing upward
and rotating clockwise.
Pour remaining
sanitizer down
dispenser drain.
Allow to air dry.
Use wire handled
brush to scrub holes
in plastic cap.
Scrub inner injector
rings with wire
handled brush
dipped in sanitizer.
Remove

from water
nozzle.
| MAINTENANCE | MAINTENANCE
2