Coca-Cola FREESTYLE 8100 - Pouring a Drink; Beverage Pouring Steps

           
COCA-COLA FREESTYLE
®
8100 COCA-COLA FREESTYLE
®
8100
15
14
8
Remove (outer)
white dust-cap
prior to placing
cartridge into
plastic tray.
13
Close the door and
follow on-screen
instructions to
complete the
cartridge prime
process.
(See page 13).
10
Ensure the product
cartridge is aligned
with the slot found
on the plastic tray.
11
Remove foil safety
seal prior to
inserting into the
dispenser.
12
Insert the
cartridge tray into
the slot and push
until you hear the
white latch click
into place.
| PRODUCT REPLACEMENT | PRODUCT REPLACEMENT
3
Remove the
cartridge tray with
empty product
cartridge from
the dispenser.
Replacing cartridges
9
Place product
cartridge into
plastic tray and
ensure plastic

cartridge pouch
aligns with tray.
Always replace any missing or
damaged plastic trays immediately
to prevent dispensing issues.
Plastic trays can be ordered by
calling 1-800-241-COKE (2655). In
Canada, call 1-800-318-COKE (2655).
Replacing product cartridges
starts with knowing when a
cartridge is empty or unavailable.
1
The screenshot
shows that the
Sprite ingredient
is empty. As a

icon is grayed out with a red and
will say “Not Available” when
selected.
2
View the amount of
product remaining
within each cartridge
by accessing the
dashboard.
Reference the level
indicator next to the
brand.
NOTE: Time remaining is an estimate
based on historical consumption data.
This feature may take up to three weeks
after install.
For best practices regarding
cartridge maintenance see page 28.
REMINDER: Do NOT separate double
cartridges.
4
Separate the
empty product
cartridge from the
plastic tray and
recycle the outer
paperboard box.
Then clean tray
with dish soap,
followed by
approved sanitizer
solution (Kay-5 Sanitizer
®
).
6
Dip a clean cloth
in approved
sanitizer solution,
wipe the probes
(that insert into
cartridges), then
dip a new clean
cloth into the
sanitizer solution
and wipe the probes
again to sanitize.
5
Using the
cartridge slot
cleaning tool and
sleeve (part
#149324 and
#149325), clean
the cartridge slot
area.
7
Open new
cartridge using
perforated
cartridge

CAUTION:
DO NOT use
a sharp object
to open.