EasyManua.ls Logo

Coca-Cola freestyle Flex - Dispenser Status and Features

Coca-Cola freestyle Flex
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© 2023 The Coca-Cola Company | Condential information of The Coca-Cola Company | Coca-Cola Freestyle® Flex User Guide | V7 230309 © 2023 The Coca-Cola Company | Condential information of The Coca-Cola Company | Coca-Cola Freestyle® Flex User Guide | V7 230309
COCA-COLA FREESTYLE
®
FLEX COCA-COLA FREESTYLE
®
FLEX
19
18
11
Insert the
cartridge tray into
the slot and push
until you hear the
latch click into
place.
12
Close the door
and follow
on-screen
instructions to
complete the
cartridge prime
process.
(See page 13).
| PRODUCT REPLACEMENT
4
Separate the
empty ingredient
cartridge from the
plastic tray and
recycle the outer
paperboard box.
Then clean tray
with dish soap,
followed by approved sanitizer
solution (Kay-5 Sanitizer
®
).
3
Remove the
cartridge tray with
empty ingredient
cartridge from
the dispenser.
Replacing cartridges and NNS
Replacing ingredient cartridges or
NNS starts with knowing when a
cartridge or NNS is empty or
unavailable.
1
The screenshot
shows that the
Sprite ingredient
is empty. As a
result, the brand
button is grayed out and will
say “Not Available” when selected.
2
View the amount of
ingredient remaining
within each cartridge
or NNS by accessing
the dashboard.
Reference the level
indicator next to the
brand.
NOTE: Time remaining is an
estimate based on historical
consumption data. This feature may
take up to three weeks after install.
For best practices regarding
cartridge maintenance, see page 28.
| PRODUCT REPLACEMENT
2%
Sprite
enjoy by
MM/DD/YY
2 hours
remaining
5
Clean the
cartridge slot
area.
Dip a clean cloth
in approved
sanitizer solution,
wipe the probes
(that insert into
cartridges), then
dip a new clean
cloth into the sanitizer solution and
wipe the probes again to sanitize.
9
Ensure the
ingredient
cartridge is aligned
with the slot found
on the plastic tray.
10
Remove foil safety
seal prior to
inserting into the
dispenser.
7
Remove (outer)
white dust-cap
prior to placing
cartridge into
plastic tray.
8
Place ingredient
cartridge into
plastic tray and
ensure plastic

cartridge pouch
aligns with tray.
6
Open new
cartridge using
perforated
cartridge

CAUTION:
DO NOT use
a sharp object
to open.
Always replace any missing or
damaged plastic trays immediately
to prevent dispensing issues.
Plastic trays can be ordered by
calling 1-800-241-COKE (2655). In
Canada, call 1-800-318-COKE (2655).
NNS (Non-Nutritive Sweetener) is used for all low/no-calorie
beverages. NNS arrives in a SmartPAK™ cartridge and is replaced
just like other ingredient cartridges. They will always be in the
number one (1) or top slot in the cartridge shelf.

Related product manuals