Coca-Cola Freestyle - Clean Ice Chute

COCA-COLA FREESTYLE DISPENSER CREW GUIDE
WEEkLY TASkS | CLEAN ICE ChUTE
20
2
Remove the lower chute by carefully
pulling on the front lip of the lower chute.
It should disengage and pull forward.
3
Remove the upper chute by carefully
pulling on the upper lip of the upper chute.
It should disengage and pull forward.
5
Use a clean, sanitized
towel or cloth to wipe the
ice chute body area.
6
Reinstall the upper ice
chute by pushing up and
into the ice chute body
until a click sound is made.
7
Reinstall the lower ice chute
by pushing up and into the
bottom of the upper ice chute
until a click sound is made.
1
Turn off power to the dispenser.
Refer to “Power the Dispenser
On/Off” on page 5 for instructions.
Unplug the unit.
To make sure that no mechanical
parts move during cleaning.
CAUTION:
If there is an ice maker on top of the
Coca-Cola Freestyle dispenser, follow
established procedures for cleaning
the ice bin.
8
Plug the unit back in to the
electrical outlet.
Turn on power to
the dispenser.
Test to ensure the dispenser
is operating properly.
Refer to “Power the Dispenser On/Off”
on page 5 for instructions.
CAUTION:
DO NOT use paper towels.
They may break apart and
clog the ice bin.
4
Wash upper and
lower chute with
sanitizing solution.
3 Ice Chute Body
2 Upper Ice Chute
1 Lower Ice Chute