# For more information refer to the Apple Accessibility Quick Guide.
Turn on microphone.
Note: Ensure microphone is
charged.
Press the pairing button once
for channel 1, twice for channel
2, three times for channel 3.
Note: The LED will blink orange
for 20 seconds while device is in
pairing mode.
2 3
You can now begin streaming to one
or both hearing devices.
Note: Streaming must be started and
stopped on each device individually.
Nucleus 7 Sound Processor
Press and hold the button on your
sound processor for 2 seconds, then
release
the button.
Cochlear CR310 Remote Control
Press and hold the Telecoil button for
2 seconds, then release.
6 7
Plug power and audio cables into
TV streamer and connect to audio
source. Turn on TV streamer.
Press pairing button.
Note: The LED will blink orange for
20 seconds while device is in pairing
mode.
2 3
8 9
Bimodal pairing with wireless accessories
You can stream to your Nucleus 7 Sound Processor and ReSound hearing aid from a ReSound Multi Mic, Cochlear
Mini Microphone 2/2+, ReSound TV Streamer 2 or Cochlear TV Streamer.
3
sec
1
2
5
sec
Rechargeable
Non-rechargeable
1
2
5
sec
Rechargeable
Non-rechargeable
1
Turn o ReSound
hearing aid and Nucleus 7
Sound Processor.
5
4
Turn on your hearing
aid and then turn on
your sound processor.
Note: The LED will
flash blue to show
pairing was successful.
10
Streaming to both ears
Through Apple’s accessibility menu
you can control streaming to both
the sound processor and hearing aid.
Triple click the home button to access
controls for turning on a streaming
source and to adjust volume.
#
Microphone
TV Streamer
3
sec
or
2
sec
ReSound Remote Control 2 (optional)
Press the streaming button on this
remote control.
ReSound hearing aid
Press and hold the push button on your
ReSound hearing aid.
Rechargeable
Non-rechargeable
To Next Page
Loading...
