Cochlear Nucleus 7 - Page 4

6 7
If you have Touch sounds enabled on your
smartphone, the Touch sounds screen displays.
Follow the screen prompts to disable Touch
sounds, then tap the back button to return to the
Nucleus Smart App.
1918
Notes:
• To pair additional
compatible devices,
you must fi rst disable
Bluetooth on existing
paired devices.
• For more
information, see
the Nucleus Smart
App User Guide
and the Kanso 2
Sound Processor
User Guide.
When the Setup
complete! screen
displays, tap ‘Continue’.
14 15 16
17
6 7 85
1
2
3
4
13
12
The Detect your processor(s) screen displays.
• Triple tap your processor to turn it off. You
will see an amber light for 4 seconds,
• Double tap your processor to turn it on.
10 11
9
Wait while the
Connecting to
processor screen
displays.
Kanso 2 Sound Processor
To pair with a compatible Android device
*
you will need to use the Nucleus Smart App.
Note: When trying to pair or connect your sound processor with the app, you may experience interference from
some devices (e.g. microwave ovens, wireless routers or TV streamers). If this happens, move away from the
device and try again.
2
tap
3
tap
Tap an option in the
Sound Processor(s)
screen and if
prompted, enter
user details.
When your processor
displays, tap once to
start pairing. Note
that your paired
hearing aid may not
display on this screen.
Create your Cochlear
account or login if you
have an account.
Create your Cochlear
account or login if you
have an account.
The Detect your processor(s)
screen displays.
Turn your processor ‘OFF’,
then ‘ON’. Tap ‘Continue’.
Tap an option in the
Sound Processor(s)
screen and if
prompted, enter
user details.
Have your processor ready.
Switch on Bluetooth on your
Android smartphone.
Run Nucleus Smart App.
Swipe through the
Welcome screens.
Have your processor ready.
Switch on Bluetooth on your
Android smartphone.
Run Nucleus Smart App.
Swipe through the
Welcome screens.
The Enable data sync
screen displays.
If you would like to use
this feature, tap ‘Enable’.
The Paired
processor screen
displays when
pairing is complete.
Tap ‘Continue’.
The Pair your processor(s)
screen displays.
Tap Continue’.
The Pair your processor(s)
screen displays.
Tap Continue’.
When your processor
displays, tap once to start
pairing. Note that your
paired hearing aid may
not display on this screen.
The Enable data
sync screen displays.
If you would like to
use this feature,
tap ‘Enable’.
When the Audio
streaming screen
displays, tap ‘Enable’.
Your sound processor
will turn off for a few
moments.
When the Verify
processor screens
display:
A. Remove and then
double tap your
processor to turn it on.
B. Place your processor
on your head and tap
‘Continue’.
In the Location popup,
tap ‘OK’.
In the Location popup, tap
‘OK’.
The Paired processor screen
displays when pairing is
complete. Tap ‘Continue’.
When the Audio
streaming screen
displays, tap ‘Enable’.
Your sound processor
will turn off for a
few moments.
If other sound processor(s) are already paired
or streaming to your smartphone you need to
‘Forget’ them now.
Follow the screen prompts to ‘Forget’ the
processor(s), then tap the back button to return
to the Nucleus Smart App.
Enable location services.
Enable location services.
When the Verify processor screens
display:
A. Remove your processor and
press the processor button
B. Place your processor on your
head and tap ‘Continue’.
If you have Touch sounds enabled on your
smartphone, the Touch sounds screen
displays. Follow the screen prompts to disable
Touch sounds, then tap the back button to
return to the Nucleus Smart App.
1918
Notes:
• To pair additional
compatible devices,
you must fi rst disable
Bluetooth on existing
paired devices.
• For more information,
see the Nucleus Smart
App User Guide and
the Nucleus 7 Sound
Processor User Guide.
When the Setup
complete, screen
displays, tap ‘Continue’.
14 15 16
17
6 7 85
1
2
3
4
13
12
10 11
9
If other sound processor(s) are already paired or
streaming to your smartphone you need to ‘Forget’
them now.
Follow the screen prompts to ‘Forget’ the
processor(s), then tap the back button to return
to the Nucleus Smart App.
Wait while the
Connecting to
processor screen
displays.
Nucleus 7 Sound Processor
To pair with a compatible Android device* you will need to use the Nucleus Smart App.
Note: When trying to pair or connect your sound processor with the app, you may experience interference from
some devices (e.g. microwave ovens, wireless routers or TV streamers). If this happens, move away from the
device and try again.