CoComm F300 - Settings; Call Settings

24
Settings
Keep pressing the [ ] key for 2 seconds and enter the password to access the setup
mode. Default password of the phone is 2580.
Within configuration mode you can access the Clock and Settings menus. Use the
[ ] [ ] buttons to move through the different options and press [ OK ] button to
access submenus or select desired option, or press the [ ] key to return to previous
level.
Within Settings configuration you may access following options:
Settings > Calls
● Call divert: enable or disable incoming calls to other numbers or assigned users.
● Call waiting: activate or deactivate call waiting service. This option allows you to
be notified of an incoming call while you have a call and switch between the two
calls. This function must be supported by your network operator. Please contact
your network operator for more information.
● Call barring: set restrictions on incoming and outgoing calls. This function must
be supported by your network operator. Please contact your network operator
for more information.
● Call time minute reminder: enable or disable alert notification 10 seconds prior to
next minute during a call.
● Auto dialing delay: select autodial function waiting time. With this feature, your
phone will automatically call the number entered after the selected delay elapses.
● Auto redial: enable or disable auto call function. If your call failed during
connection, your phone will automatically make the call for 10 times.
● Fixed dial: this feature allows you to restrict outgoing calls to a particular list of
phone numbers. It is necessary that the SIM card supports this function, and
requires PIN2 code. Please contact your network operator for more information.
● Direct dial: enable this feature to automatically call specified phone number just
after lifting the handset.