Codan 9350 User Manual

Compliance
Automatic Tuning Whip Antenna 9350 Installation Handbook 27
European Radio and Telecommunications
Terminal Equipment Directive
The 9350 Automatic Tuning Whip Antenna has been tested
and complies with the following standards and requirements
(articles of the R&TTE Directive):
• Article 3.1b: ETSI EN301489-1 V1.4.1
• Article 3.1b: ETSI EN301489-15 V1.2.1
• Article 3.1a: EN60950-1
Product marking and labelling
Any equipment supplied by Codan that satisfies these
requirements is identified by the , or
markings on the model label of the product.
Declaration of Conformity
The CE Declaration of Conformity for the product is listed on
page 37, Associated documents. This document can be made
available upon request to Codan or a Codan-authorised
supplier.
0191 0191

Codan 9350 Specifications

General

Input Impedance	50 ohms
Polarization	Vertical
Frequency Range	2 MHz to 30 MHz
Tuning Speed	Typically <1.5 seconds
Type	Automatic Tuning Mobile Antenna
VSWR	Typically <1.5:1