Compliance
Automatic Tuning Whip Antenna 9350 Installation Handbook 29
Electromagnetic compatibility
To ensure compliance with the EMC Directive is maintained,
you must:
1 Use the standard shielded cables supplied from Codan
(where applicable).
Electrical safety
To ensure compliance with the European Low Voltage
Directive is maintained, you must install the 9350 Automatic
Tuning Whip Antenna in accordance with the instructions in
this handbook, and operate the 9350 Automatic Tuning Whip
Antenna in accordance with the instructions in the relevant
Getting Started Guide and Reference Manual for your
transceiver.
To Next Page
Loading...
