Codan Envoy User Manual

Once inside the Austravel EMERGENCY screen, it
should look something like this
8) “Arrow Down” to the last “EMERGENCY Ch” in
the list and press “OK”.
9) “Arrow Down” to “Call Type” then “Le Hand
Arrow” across to “Send Posion”
10) Press the “Save Buon” then “Close”
11) Reboot the radio.
There is no easy way to test these sengs without seng o Emergency Alarms all over Australia.
You can work your way back into the Emergency Sengs to make sure the last channel seng is set to SEND
POSITION.
This seng will allow the Envoy to return to SCAN MODE automacally aer the Emergency Call chain is com-
plete.
This document and graphics courtesy of Colin Ingham 6355 on behalf of the Austravel Safety Net HF Radio
Network are intended for the owners/operators of Codan Envoy’s X1/X2 that are part of the Austravel Safety
Net Group. Please check you radio for the seng above.
This document should also be used as guide to those people around Australia seng Envoys for the Austravel
Safety Net Group’s HF Radio Network.
Page 3 of 3
20 Kiss Envoy Red Buon

Codan Envoy Specifications

General

Brand	Codan
Model	Envoy
Category	Transceiver
Language	English