Code 3 Pursuit Siren - User Manual

Designed in Australia, the Code-3 Pursuit Siren sets a new benchmark in audible warning
systems. With two independent 100W speaker channels and multi-voltage operation, the
Pursuit Siren is ready for action on the full spectrum of emergency vehicles. Approved to
the highest standards in acoustics, EMC and reliability, the siren is fully network compatible
and integrates seamlessly with other network enabled products such as the Pursuit Lightbar
and Matrix Display, to provide complete vehicle warning systems with truly unique features.
`
WARNING!
Failure to install or use this product according to manufacturer’s recommendations may result
in property damage, serious bodily/personal injury, and/or death to you and those you are
seeking to protect!
SPECIFICATIONS
Input Voltage Range 10-30 VDC
Current Draw - Standby (Typ.) 10 mA
Current Draw (200W) 18A (12V) / 9A (24V)
Speaker Voltage 33Vrms
Dimensions (H x W x D mm) 65 x 121 x 37
Ambient Operating Temperature -30 to +65 °C
Features 8 congurable I/O
3 xed position inputs
Over-voltage, under-voltage, thermal shutdown
protection and reverse polarity protection (-36V)
Public Address Microphone with Adjustable Volume
Radio Rebroadcast Capability
Software Congurable with USB update.
Vehicle Horn Interface (HRT)
Output short-circuit protection
CERTIFICATIONS:
ECE R10, SAE J1849 (when paired with C3100 speaker), CISPR-25, RCM
Installation and
Operation Instructions
Pursuit Siren

Code 3 Pursuit Siren Specifications