Code 3 SuperVisor User Manual

4
FIGURE 4
FIGURE 3
FIGURE 5
Attach brackets to sun visor retaining clips
In order to remove the sun visor retaining clip, unscrew the single torx screw holding it in place (see figure 3). Place the inner
bracket on the retaining clip (as shown in Figure 4). Attach the inner bracket and retaining clip to the headliner (as illustrated in
Figure 5). Do not completely tighten the screw at this time.

Code 3 SuperVisor Specifications

General

Brand	Code 3
Model	SuperVisor
Category	Automobile Accessories
Language	English