Code Alarm CA 5055 - Remote Control Operations and Maintenance; Remote Control Buttons and Battery Replacement

92017 Voxx Electronics Corporation. All rights reserved.
Remote Control Buttons & Functions
4-Button
Transmitter
Lock Unlock
Car Find /
Panic
Start Operation Method
Lock X
Press and Release
Unlock X
Press and Release
Trunk X
Push and Hold (3 Sec)
Car FinderX
Press and Release
PanicX
Push and Hold (3 Sec)
Remote Star
tX
Press and Release (1 or 2 times
depending on selectable option)
Remote Start
Shut Down
X
Push and Hold (3 Sec)
Run Time
Extention
X
Press and Release 4 times.
2 / 3 Hour Start X
Ignition ON/OFF, Press and Hold
Valet Button, Press Start 4 times
Daily Start Timer XX
Press Lock + Start
Replacing Remote Control Batteries
1-Way Remote Control (part # CAT4P)
The battery (model CR2032) inside each remote control should last approximately 1
year under normal use. When the battery becomes weak you will notice the remote
control range (the distance from the vehicle the remote control will work) deteriorate
and the small LED on the remote control will dim. To replace the remote control
battery:
1. Unsnap and disassemble the halves of the remote control.
2. Remove the old battery, observing the +/- symbols on the battery
and replace with a new CR2032 battery.
3. Reassemble the halves of the remote control.
4. Test operation of the remote control.