Code Alarm CR2032 - Remote Start Safety Features; Safety Shutdown Conditions; System Indicators and Diagnostics; Status LED Flash Indications

6 ca4055 Owners
Status LED, Light Flashes, and Horn Chirp Indications
Status LED Flash Indications
LED Flashes Function
1 - 4 ashes / Ignition On PTN
ON (Solid) Valet Mode
Siren/Horn Chirp Indications
Chirps Function
1 Remote Start Activation
Parking Light Flash Indications
Flashes Function
ON (Solid or Slow Flash) Remote Started
Remote Start Shutdown Diagnostics
Parking Light Flashes Shutdown Zone
3 Flashes Hood / Brake Input
4 Flashes Remote Start Valet Mode
7 Flashes Tach not learned / Crank Average not
learned
Remote Start Safety Features
For safety and security reasons, the system will shutdown or prevent the remote
vehicle starter from activating if any of the following occur:
1. The vehicle’s hood is open.
2. The brake pedal is pressed prior to turning the ignition key to the ON
position.
3. The engine is over-revved (tach checking only).
4. Valet Mode is active.