Need help?Do you have a question about the Code Alarm Vehicle Security System and is the answer not in the manual?
General| Brand | Code Alarm |
|---|---|
| Model | Vehicle Security System |
| Category | Car Alarm |
| Language | English |
Automatically arms system and disables vehicle starter one minute after ignition is turned off.
Doors automatically lock 60 seconds after ignition off if passive lock option is enabled.
System locks doors on ignition ON and unlocks on ignition OFF if all openings are closed.
Opening protected doors triggers siren and flashes parking lights.
Detects jolts or bumps associated with vehicle intrusion.
Sounds siren and flashes lights to draw attention to vehicle and surrounding area.
A bright-red light on dashboard indicates alarm system status.
Vehicle courtesy lights illuminate for one minute when system is disarmed and ignition is off.
Allows convenient locking and unlocking of doors with the remote transmitter.
System arms after 4 mins if a protected entrance is left open.
Trunk release activated by pressing and holding DISARM/TRUNK button on remote.
Enables selective arming/disarming with or without confirmation chirps.
Step-by-step guide to arm the security system using the remote transmitter.
Step-by-step guide to disarm the security system using the remote transmitter.
Identifies the cause of an alarm trigger by counting siren chirps after disarming.
Temporarily disables the impact sensor to prevent false alarms from vibration.
How to activate the vehicle's trunk release using the remote transmitter.
How to activate the panic alarm feature using the remote transmitter.
How to engage and disengage valet mode to prevent the system from arming.
Explains the meaning of different status indicator light patterns for system operation.
Describes the function of the hidden button for system control and programming.
Steps to disarm the system using the override button if the remote transmitter is lost or stolen.
Step-by-step instructions for replacing the battery in the remote transmitter.
Instructions for programming additional remote transmitters to the security system.
Guide to configuring various system features and options using the remote.
To Next Page
