Code CR1400 User Manual

To Detach a Cable
Press a paper clip into the hole on the side of the CR1400 handle, and gently pull
the cable from the reader.
Reset to Factory Defaults
Reset to USB Factory Defaults Reset to RS232 Factory Defaults
14870 S. Pony Express Rd. #200 Bluffdale, UT 84065
www.codecorp.com (801) 495-2200
To Detach a Cable
Press a paper clip into the hole on the side of the CR1400 handle, and gently pull the
cable from the reader.
Reset to Factory Defaults
Reset to USB Factory Defaults Reset to RS232 Factory Defaults
14870 S. Pony Express Rd. #200 Bluffdale, UT 84065
www.codecorp.com (801) 495-2200
Universal Stand Assembly (included when ordered as a Kit/Package)
Universal Stand Assembly (included when ordered as a Kit/Package)

Code CR1400 Specifications

General

Connectivity	Bluetooth
Decode Capability	1D, 2D, Postal
Drop Specification	6 ft. / 1.8 m
Interface	USB, RS232, Keyboard Wedge, Bluetooth
Operating Temperature	32° to 122°F / 0° to 50°C
Supported Barcodes	Codabar, Code 128, Code 39, Interleaved 2 of 5, MSI

Summary

Factory Default Reset Procedures

Reset to USB Factory Defaults

Procedure to reset the reader to USB factory default settings using a QR code.

Reset to RS232 Factory Defaults

Procedure to reset the reader to RS232 factory default settings using a QR code.

Cable Management and Accessories

Detaching the Cable

Instructions on detaching the cable from the CR1400 handle using a paper clip.

Universal Stand Assembly

Information about the universal stand assembly included with kits or packages.

Code Reader 1400 Setup and Usage

Connecting and Powering Up

Steps for connecting the reader via USB or RS232 and powering it on.

Scanning Operation

Guidance on using the blue bars for aiming and pressing the trigger to scan.