Need help?Do you have a question about the Code CR5000 and is the answer not in the manual?
General| Brand | Code |
|---|---|
| Model | CR5000 |
| Category | Barcode Reader |
| Language | English |
Enables iOS keyboard mode for T500 Bluetooth scanner.
Configures Bluetooth disconnection behavior for T500 devices.
Sets T500 Bluetooth scanner to HID keyboard mode.
Configures SPP one-way mode for T500 Bluetooth serial communication.
Enables iOS app mode for T500 Bluetooth scanner.
Configures SPP two-way mode for T500 Bluetooth serial communication.
Configures motion detection mode when the scanner is off-counter.
Configures motion detection mode when the scanner is on-counter.
Enables standalone age verification functionality.
Disables standalone age verification functionality.
Configures the trigger mode for off-table scanning.
Configures the trigger mode for on-table scanning.
Configures barcode detection for off-table scanning.
Enables always-on scanning mode on-table.
Enables always-on scanning mode off-table.
Sets default barcode detection for on-table scanning.
Configures pick list mode for on-table scanning.
Configures pick list mode for off-table scanning.
Enables mirroring for barcode scanning.
Sets default mirroring mode to off.
Sets default targeting mode to on.
Disables targeting for barcode scanning.
Enables default cell phone reading enhancement.
Disables cell phone reading enhancement.
Enables the addition of a timestamp prefix to scanned data.
Sets default to disable timestamp prefix.
Converts all scanned output characters to lowercase.
Resets prefix and suffix data to default settings.
Resets prefix data to default settings.
Resets suffix data to default settings.
Enables the AIM ID prefix for scanned data.
Sets default to disable AIM ID prefix.
Adds carriage return and line feed as prefix in RS232 mode.
Adds a comma as a prefix to scanned data.
Adds a space as a prefix to scanned data.
To Next Page
