Code CR5000 User Manual

A1 A4A2 A3
B1 B2 B3
C1 C4C2 C3
D1 D4D2 D3
E1 E4E2 E3
B4
CR5000 Configuration Guide
NOTE: Configuration changes will take effect immediately and be saved to memory
Web Generated Configuration Guide
For questions regarding reader configuration contact support@codecorp.com.
18
Reader - Enable RS232
OPOS/JPOS
Reset to RS232 Factory
Defaults
RS232 Interface 1200 Baud
Rate
RS232 Settings
RS232 Interface 2400 Baud
Rate
RS232 Interface 4800 Baud
Rate
RS232 Interface 9600 Baud
Rate
RS232 Interface 19200 Baud
Rate
RS232 Interface 38400 Baud
Rate
RS232 Interface 57600 Baud
Rate
RS232 Interface 115200 Baud
Rate - Default
RS232 Interface 7 Data Bits
RS232 Interface 8 Data Bits -
Default
RS232 Interface Stop Bits 1 -
Default
RS232 Interface Stop Bits 2 RS232 Interface Even Parity
RS232 Interface Odd Parity RS232 Interface No Parity -
Default
RS232 Interface Flow Control
Off - Default
RS232 Interface Flow Control
- Hardware

Code CR5000 Specifications

General

Brand	Code
Model	CR5000
Category	Barcode Reader
Language	English