EasyManua.ls Logo

Code CR2700 - User Manual

Code CR2700
47 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
D032263_01 CR2700 User Manual

Table of Contents

Other manuals for Code CR2700

Preview: Configuration Guide
Configuration Guide27 pages

Questions and Answers

  • F
    Francis TurnerAug 18, 2025
    What to do if Code Barcode Reader scans but doesn't transmit data?
    • S
      Sarah BrownAug 18, 2025
      If the Code Barcode Reader scans the barcode but doesn't transmit data to the host, there might be an issue with the communication mode. You can resolve this by setting the scanner to the correct communication mode using the appropriate M-code available on Code's website. Note that USB Keyboard is the most common mode. Alternatively, if CortexTools2 is open, it might be taking ownership of the scanner, preventing data transmission elsewhere; in this case, close CortexTools2.
  • A
    andrewsdeborahAug 20, 2025
    How to fix incorrect data transmission with Code CR2700?
    • M
      Michael White Jr.Aug 21, 2025
      If the host receives incorrect data or misses characters when using the Code Barcode Reader, the keyboard language may be incorrect. Use an M-code to set the keyboard language to match your system settings. Also, the communication protocol could be incorrect. Find and scan the M-Code to set raw data or package data.
  • X
    xowensAug 23, 2025
    Why does my Code Barcode Reader beep four times after scanning a configuration code?
    • G
      Glen WaltonAug 23, 2025
      If your Code Barcode Reader is beeping and vibrating four times after scanning a configuration code, the reader successfully decodes but fails to process the configuration code. Ensure you are using the correct configuration codes for the reader.
  • D
    dennis71Aug 26, 2025
    Why is there no illumination when I press the scan button on my Code Barcode Reader?
    • G
      gregory89Aug 26, 2025
      If the Code Barcode Reader's illumination and/or targeting don't activate when you press a scan button or the trigger, the battery might be out of power. Try charging the battery or replacing it with a freshly charged one, ensuring the LEDs on the battery blink while charging. If the top LED on the scanner is blinking red, it indicates a hardware failure, and you should contact support.
  • R
    Roberta HartmanAug 27, 2025
    Why is the wireless LED flashing on my Code Barcode Reader?
    • W
      Whitney LaneAug 27, 2025
      If the Wireless LED on your Code Barcode Reader is flashing once per second, the reader isn't connected to a charger or host (PC, tablet, mobile phone that supports Bluetooth Low Energy). Move the reader within Bluetooth range of a charger/host. Scan the QuickConnect Code on the charger to pair and connect. Alternatively, use Device Manager on the host to pair and connect with the reader.
  • A
    Amanda HerringAug 30, 2025
    What does three beeps mean on Code CR2700 Barcode Reader?
    • S
      Steven HowardAug 30, 2025
      If the Code Barcode Reader is beeping three times, it may have failed to connect to a Bluetooth charger or is failing to transfer data after decoding. Ensure the charger is powered up (Wireless logo on the charger is lit or blinking) and scan the QuickConnect Code again. Also, make sure the scanner is connected to the charger base by scanning the QuickConnect code.
  • K
    Karl HenrySep 1, 2025
    Why won't my Code Barcode Reader scan with the light on?
    • S
      scastilloSep 1, 2025
      If the Code Barcode Reader's illumination is on but it's not scanning barcodes, ensure the symbology you are scanning is enabled. Symbologies can be enabled or disabled using configuration codes (M-Codes) on Code’s website.
  • K
    Kelly MathewsSep 3, 2025
    What to do if the battery indicator doesn't light up on my Code Barcode Reader?
    • J
      Juan ReidSep 3, 2025
      If the power gauge on the Code Barcode Reader's battery is pressed and no LEDs turn on, the battery might be out of power or malfunctioning. Charge the battery or replace it with a freshly charged one, ensuring the battery LEDs blink while charging. If charging doesn't resolve the issue, replace the battery with a functioning one.
  • J
    Joseph PriceSep 5, 2025
    What does it mean when wireless LED flashes every 10 seconds on Code CR2700 Barcode Reader?
    • H
      Heather ReedSep 5, 2025
      If the Wireless LED on your Code Barcode Reader flashes once every 10 seconds, the reader is in sleep mode and out of charger. Place the reader in the charger or press any button to wake it up.
  • B
    Bradley CrawfordSep 8, 2025
    Why does my Code CR2700 Barcode Reader keep beeping until I press a button?
    • H
      Haley PhillipsSep 8, 2025
      If your Code Barcode Reader is beeping until a button is pressed, paging has been turned on. The beeping will continue until a reader button is pushed, the paging button on the charger is touched for more than 1 second, or paging times out (30 seconds by default).

Summary

1. Introduction

Product Overview and Features

An introduction to the CR2700 reader, highlighting its key features and purpose.

2. Configuration Codes

Factory Defaults and Reboot

Codes for resetting the reader to factory defaults and performing a device reboot.

Bluetooth HID Keyboard Setup

Code to set the reader for direct connection to hosts as a keyboard.

3. CR2700 Readers and Accessories

Reader Models and Descriptions

Lists available CR2700 reader models and their specific descriptions.

Charging Stations and Cables

Details available charging station models and USB cable specifications.

Mounting Brackets and Other Accessories

Lists accessories like mounting brackets, batteries, and power supplies.

4. Supporting Documents and Resources

Key Documentation Overview

Summary of Quick Start, Interface Control, and Configuration Control documents.

Configuration and Development Tools

Information on CortexTools2 software and Configuration Guide Generator.

JavaScript Programming Guide

Details on using JavaScript for advanced reader customization.

5. Unpacking and Installation

CR2700 Reader Features & Setup

Details CR2700 reader features, unpacking, battery insertion, and charging.

Charging Station & Mounting Options

Features of charging stations, desktop/wall/VESA mounts, and connection.

Bluetooth Pairing and Connectivity

Guides on pairing the reader with charging stations and hosts, and managing links.

6. CR2700 Operations

Scanning Methods and Targeting

How to perform handheld scanning, use the targeting bar, and presentation scanning.

Battery Management and Paging

Understanding battery status, health, and using the paging function.

Reader Power Modes

Explains the different operational power modes of the CR2700 reader.

7. User Feedback Indicators

CR2700 Reader Feedback

Details visual, audio, and haptic feedback for various reader statuses.

CRA-B27 Battery and Charging Station Indicators

Explains visual LED indicators for battery and charging station status.

8. Configuring the CR2700

Configuration Guide Generator

Using the online tool to generate configuration codes for the reader.

CortexTools2 Software Configuration

Using PC software for device management, updates, and settings.

JavaScript for Customization

Leveraging JavaScript for advanced customization and unique features.

9. Bluetooth Radio Communications

Radio Power and Security

Details Bluetooth radio power levels, adjustments, and security features.

Auto-Reconnect Functionality

How the auto-reconnect feature operates and can be disabled.

10. Interface Parameters

Charging Station USB Interface

How the CRA-A271 connects to a host via USB cable.

Reader Bluetooth HID Interface

How the CR2700 communicates as a Bluetooth HID keyboard device.

11. Programming Reader Buttons

Reader Button Customization

How to program reader buttons for different functions and scanning modes.

12. CR2700 Specifications

Typical Reading Ranges

Table detailing reading distances for various barcode types under test conditions.

Supported Barcode Symbologies

Lists all supported barcode symbologies and their default enabled/disabled status.

Product Dimensions

Diagrams and measurements for the CR2701 and CR2702 readers.

13. CR2700 Device Information

Reader Information Retrieval

How to retrieve reader model, serial, firmware, and license details.

Bluetooth Charger Information

How to obtain charger model, MAC address, and firmware version.

Battery Information Retrieval

How to obtain battery serial number and health status.

14. Maintenance and Troubleshooting

Approved Disinfectants

List of approved disinfectants for cleaning the CR2700 readers.

Routine Cleaning Procedures

Step-by-step instructions for routine cleaning and disinfection.

Troubleshooting Common Issues

Table of common problems, their causes, and potential solutions.

15. Contact Code for Support

Support Contact Information

How to contact Code support and details required for assistance.

16. Limited Warranty

Warranty Coverage and Terms

Details the 3-year warranty, repair, and replacement policies.

Warranty Exclusions and Limitations

Lists conditions not covered by warranty and limitations on liability.

RMA and Shipping Information

Information on return merchandise authorization, shipping, and data responsibility.

Code CR2700 Specifications

General IconGeneral
Scanning SpeedUp to 100 scans per second
Operating Temperature0°C to 50°C (32°F to 122°F)
ConnectivityUSB
Decode Capabilities1D
DurabilityIP65
InterfaceUSB, RS-232
Power SupplyRechargeable battery
Storage Temperature-4° to 158°F (-20° to 70°C)

Related product manuals