Document Version: 0.2 Status: Draft
Page 5 of 9
Enable Keypad Illumination by Proximity
#Master Code • 14 • 1 Start Hour <00-23> • End Hour <00-23> ••
#12345678 • 14 • 1 • 08 • 17 ••
Result: Keypad illumination by proximity is enabled.
Note: Battery life will be reduced by enabling keypad illumination.
Enable Keypad Illumination by Button Press
#Master Code • 14 • 2 • Start Hour <00-23> • End Hour <00-23> ••
#12345678 • 14 • 2 • 08 • 17 ••
Result: Keypad illumination by button press is enabled.
Note: Battery life will be reduced by enabling keypad illumination.
Disable all Access Methods (Lock-Down)
Prevent the lock from being unlocked by any method except via Master Code
Disable all Access Methods (Lock-Down)
#Master Code • 15 • 1 ••
#12345678 • 15 • 1 ••
Result: Lock-down is enabled. Only the Master Code can be used to open the lock.
Cancel Lock-Down
#Master Code • 15 • 2 ••
#12345678 • 15 • 2 ••
Result: Lock-down is cancelled.
Clients (Users)
Add a New Client
Four different types of client can be created when the lock is in standalone operation: standard code client, one-time
code client (where the code will be blocked after a single use), card user (MIFARE based smartcards) and technician
clients (only applicable when GuestCode is being used).
Add an Code Client
#Master Code • 20 • 1 • Code ••
#12345678 • 20 • 1 • 3366 ••
Result: The code 3366 can now be used to unlock the lock.
Add a One-Time Code Client
#Master Code • 20 • 2 • Code ••
#12345678 • 20 • 2 • 7788 ••
Result: The code 7788 can be used to unlock the lock once only after which time it will be blocked.
Add a Smart Card Client
Note: After entering the program below, the lock will wait for a MIFARE based smartcard to be placed over the keypad.
#Master Code • 20 • 3 ••
#12345678 • 20 • 3 ••
Result: The Smartcard will be able to unlock the lock.
Add a Technician Code Client
Note: Only applicable when the GuestLock feature is enabled.
#Master Code • 20 • 4 • Technician Code ••
#12345678 • 20 • 4 • 4499 ••
Result: The Technician Code 4499 is now enabled.
Suspend and Restore Clients
Any Code Client can be suspended and restored. Smart Card Clients cannot be suspended when the lock is in standalone
operation.
Suspend a Code Client
#Master Code • 21 • Code ••
To Next Page
Loading...
