Document Version: 0.2 Status: Draft
Page 7 of 9
#12345678 • 28 • 5 ••
Result: All Active Periods suspended.
Restore All Active Periods for All Clients
Note: Includes Code and Smart Card clients.
#Master Code • 28 • 6 ••
#12345678• 28 • 6
Result: All Active Periods restored.
Selected Day Lock-Out
This program will lock out all Clients on the specified days. Please note that if a Client has a specific Active Period, that
will take priority over the selected day lock-out program.
Enable Selected Day Lock-Out
Note: This program does not affect Master Codes, Sub-Master Codes or NetCodes. This program will affect Code Clients,
Smartcard Clients and GuestCode Clients.
#Master Code • 29 • Week Pattern ••
#12345678 • 29 • 1111100 ••
Result: Entry only permitted on Mondays to Fridays.
Help: The week pattern uses a sequence of 7 numbers (MTWTFSS) that enable (1) or disable (0) Code-Free on a particular
day.
Disable Selected Day Lock-Out
#Master Code • 29 • 0000000 ••
#12345678 • 29 • 0000000 ••
Result: Selected Day Lock-Out is disabled.
NetCode
NetCode provides a convenient way to provide date/time restricted Codes to people via the
Codelocks Portal.
Initialise NetCode
Before NetCode can be used, the lock must be set-up first. The program below is provided for reference only. To
initialise the lock correctly, follow the prompts on the Codelocks Portal.
#Master Code • 50 • YYMMDDHHmm • Lock Identifer <100000,999999> ••
#12345678 • 50 • 1601221630 • 123456 ••
Result: NetCode is initialised and the date/time is set to January 22
nd
, 2016 16:30.
Note: Local/date time should be specified.
Important: Please note that if NetCode is used in conjunction with other entry methods (e.g. standard Codes or Smart
Cards), a NetCode must be prefixed with the * button. To enable or disable other entry methods, see Feature Restrictions.
Block a Specific NetCode
A specific NetCode can be manually blocked using the Master Code.
#Master Code • 52 • NetCode to Block ••
#Master Code • 52 • 412682 ••
Result: The NetCode 412682 is now blocked.
GuestLock
The GuestLock feature allows a guest to choose their own 4 digit Code (GuestCode) by prefixing their
chosen GuestCode with that particular locks GuestCode prefix. The GuestLock feature must be
enabled before use.
To Next Page
Loading...
